30th March, 2021
HAVS trigger times are how long your hands and arms are exposed to vibration levels. Trigger times can often get overestimated because they are not always fully understood. In this post, we look at what trigger times are and how to measure them when assessing vibration exposure.
Do you use vibrating tools and equipment? Like a drill, a saw, or even a lawnmower. If you do, you need to be aware of the risks of vibration, the legal limits and carry out HAVS assessments. Because vibration exposure can lead to severe and irreversible health problems .
Trigger times will come up in almost every HAVS assessment you do. It will be a consideration in every vibration exposure you measure. If you don't know what a trigger time is or how to measure it, don't worry, read on for a detailed explanation.
Measuring vibration exposure is part of your HAVS assessment. You can't assess the risk from vibration without first knowing what the vibration level is. Most people jump straight into the tools handbook and look at the vibration levels. And you could assume that a tool with a vibration output of 12m/s² is worse than one with a vibration output of 5m/s². Even if you don't know what m/s² means, you know that the number 12 is bigger than the number 5, so that's where the risk is, right?
Wrong. Well, maybe right. But we don't have enough information yet! To understand why you need more information, you need to understand trigger times.
Hand-arm vibration syndrome (HAVS) can affect anyone exposed to vibration, but the longer your trigger times, the bigger the risk. Let's start by looking at what HAVS trigger times are.
HAVS trigger times are a measure of how long you are exposed to vibration. This is not just how long you are holding a tool or piece of equipment, but how long you are in contact with it while it is on, and while it is vibrating.
Let's say you are using a drill for an hour.
Are you drilling for every minute of that hour? Chances are, some of that hour gets spent measuring up and marking the positions for drilling. And once you have drilled, some time is spent fixing items in place. You might have the drill out for an hour, but your trigger times could be less than 15 minutes. Measure twice, and drill once!
The law requires you to make sure that risks from vibration are minimised and controlled. So you can get vibration levels under control and reduce the risk of HAVS, you first need to understand your exposure.
To measure vibration exposure, you need to know your trigger times. Why? Because exposure limits are time-weighted. That means that exposure limits are based on the length of time you are exposed to vibration. The longer you use a vibrating tool, the bigger the risk.
Let's take our example from the start of this post. We have a 12m/s² tool and a 5m/s² tool. When is the 5m/s² worse than the 12m/s² tool? When its trigger time is long enough to make it worse.
If you use both tools for 30 minutes each, yes, the 12m/s² is worse for vibration exposure. But what about if you use the 12m/s² for only 10 minutes (because it's more powerful and gets the job done faster) and the 5m/s² tool for 120 minutes (because it's lower risk, and you needed to!).
Now our 5m/s² tool is worse. A lot worse. It accounts for 68% of your vibration exposure compared to 32% for the 12m/s² tool.
We go more into detail on calculating vibration exposure in our posts about measuring exposure action values and exposure limit values .
If you want to cheat, you can use our free HAVS calculator .
But, before you do, you need to know your trigger times!
Most people estimate trigger times, this is the quickest way, but this can be inaccurate.
If you estimate based on the amount of time you had the tool out of the box, you're going to be overestimating your trigger time.
If you estimate based on how long you think you were using the tool, you're probably going to underestimate it. You know what people say - time flies when you are having fun!
The easiest way to accurately measure trigger times is to monitor your work. There are even electronic monitoring systems you can attach to tools and users to do this for you. But if you're not ready to go hi-tech, you could keep a register of your exposure. Do this by making a note of how long you use each tool in a logbook or form.
You can even use our HAVS calculator to do that. Each time you use the tool, add it to the calculator. For example, 'Drill task 1' and 'Drill task 2' - you get the idea.
Find out how to measure and calculate vibration exposure under the legal limit , and use the free vibration toolbox talk to raise awareness.
This article was written by Emma at 新IM电竞下比赛的网址 . Emma has over 10 years experience in health and safety and BSc (Hons) Construction Management. She is NEBOSH qualified and Tech IOSH.
Learn how to control vibration, avoid hand arm vibration syndrome, and stay within the legal limits. Find out more and get your certificate.HAVS Awareness Course
There are two HAVS exposure limits, and these are legal limits for the amount of vibration you can be in contact with daily. The limits are defined in the Control of Vibration at Work Regulations and are known as the exposure limit value (ELV) and the exposure action value (EAV).Read Post
If you work with vibrating tools or equipment, you should know about HAVS. If you use powered hand tools, reducing your risks today might save you hands in later years. But what is HAVS, and how do you know if you have it?Read Post
If you work with vibrating tools or equipment, you need to act fast to spot and prevent the early symptoms of HAVS. Because once symptoms start to develop, they are permanent. Hand-arm vibration syndrome cannot be reversed or cured. Here are the early warning signs you need to look out for...Read Post
友情链： IM电竞app官方入口(im体育电竞app下载) im电竞最新版app | im电竞在线登录(IM电竞苹果下载) 2022im电竞官方下载 | im电竞竞猜app下载(IM电竞官网入口app最新版) 最新im电竞官网登录入口 | im电竞APP网址(IM电竞APP下载ios) 最新im电竞最新网站 | IM电竞官网下载(im电竞app官网) 最新im电竞网页登录ios下载 | im电竞app注册(im电竞下载官网) 2022im电竞安卓版 | im电竞app官方网站(可以观看im电竞的软件) 2022im电竞全站app下载 |