8th October, 2020


Any construction project with more than one contractor needs a principal contractor appointing under CDM. There should only be one principal contractor on a project. But what if your site has multiple projects? Can you appoint more than one principal contractor? Let's see what the regulations say.

Can You Have Two Principal Contractors On One Site? header image

As a general rule, you can only have one principal contractor on a construction project at any one time, under CDM. And to keep things simple, you really shouldn't look to change the principal contractor during the project, unless you really need to. Because pretty much every CDM document will need to be re-created, re-communicated, and an additional handover of information will be required. This is an added cost and complexity to any project, which should be avoided.

So, one project, one principal contractor (more on that later).

But what if you have multiple projects on one site. With different teams, different activities, different clients even? Let's start with the appointment of principal contractors, under CDM. And the fact that each project can only have one principal contractor.

Each CDM project can only have one principal contractor

The principal contractor is the contractor in overall control of the construction phase. By definition then, there can only be one principal contractor. Because, if you had two, no one is in overall control.

In fact, the regulations are quite clear on this.

5.—(1) Where there is more than one contractor, or if it is reasonably foreseeable that more than one contractor will be working on a project at any time, the client must appoint in writing—

  1. a designer with control over the pre-construction phase as principal designer; and
  2. a contractor as principal contractor.

So, when a project involves more than one contractor, then a principal contractor must be appointed. Not several principal contractors. Not a few. Or a couple. A principal contractor. As in, one.

cdm principal contractor

“principal contractor” means the contractor appointed under regulation 5(1)(b) to perform the specified duties in regulations 12 to 14;

The contractor. Again only one, as per the definition of the principal contractor under CDM. Even the F10 notification form only has space for the details of one principal contractor. One project, one principal contractor.

Since each construction site is usually one project, this means you can't usually have more than one principal contractor on site. But the question we are asking here isn't if you can have two principal contractors on one project (you can't), but can you have two principal contractors on one site? What about if your site is a factory, and you are going to have two separate projects? Or your site will have two new-build blocks of flats, and each block will be built by a different team?

Multiple projects

There's only one situation where you should start to think about having more than one principal contractor, and that's if you have more than one project.

Forgetting about the regulations for a moment, having more than one principal contractor just doesn't make much sense unless you have no choice. Communication on construction projects faces enough challenges without creating any more obstacles.

A key benefit of the principal contractor role is to have one main point of contact on your site during the construction phase. One point of contact that all of the contractors on the site can go to with any issues or concerns. One point of contact for the principal designer to liaise with. And one point of contact to answer the client's questions. One contractor in overall control of the site. One set of rules. One.

cdm duty holders diagram

If you add a second principal contractor, you don't really have a principal contractor at all. You're back to having multiple contractors, and the various conflicts that can come from that. Each looking out for their own interests, rather than one looking out for the overall success of the project. That's not to say contractors can't work well together (they can) but ultimately, different trades have different objectives and tasks to get done. And the whole need for a principal contractor is to have one contractor that can pull all of the different trades together, scheduling the work to deliver the project as a whole, rather than it's individual parts.

In light of this, the only time you should have two principal contractors on one site, is if you have two completely independent projects.

There may be occasions where two or more projects are taking place on the same site at the same time, but are run independently of one another. Whatever the circumstances, it is essential that there is clarity over who is in control during the construction phase in any part of the site at any given time . Where it is not possible for one principal contractor to be in overall control, those principal contractors involved must:

  1. cooperate with one another;
  2. coordinate their work; and
  3. take account of any shared interfaces between the activities of each project (eg shared traffic routes).

The CDM guidance says that if there are two (or more) projects on the site at the same time, there may be more than one principal contractor. But only where they are run independently of one another. And only where one principal contractor can't be in overall control.

By having two principal contractors, you can add extra complexity. There's additional coordination needed, because a construction site always has needs beyond its boundaries. There's deliveries, service connections, welfare needs, security, access. Some activities may extend beyond the site entrance. The two contractors need to cooperate with each other. Each site will need to comply with CDM seperately. Each project run independently.

If the projects are similar activities, run at the same time, there may be cost, productivity, and safety benefits to having one principal contractor. But this will need to be decided on a case-by-case basis, and if two projects are truly independent, it may be better to have two principal contractors, each within their different areas of expertise. Providing they can work together to ensure that the two projects can be carried out safely and not negatively impact on the other.

If you need help complying with CDM duties, get our free CDM duty holder guides for more support. And check if your project is CDM ready with the CDM compliance checklist .

share on twitter share on facebook share on linked in share by email

This article was written by Emma at 新IM电竞下比赛的网址 . Emma has over 10 years experience in health and safety and BSc (Hons) Construction Management. She is NEBOSH qualified and Tech IOSH.

Need CDM Help?

Get CDM support on your construction projects with our free guides and support packs for all duty holders.

CDM Support

Recent posts like this...

CDM Regulations Summary (And The 10 Golden Rules) image

CDM Regulations Summary (And The 10 Golden Rules)

CDM applies to all types of construction projects. No matter how big or small, how short or long. CDM applies. If you work in construction, this summary of the CDM regulations will give you a good basic introduction to what you need to do, and includes 10 golden rules to follow.

Read Post
What Welfare Facilities The CDM Regulations Say You Need On A Construction Site (By Law) image

What Welfare Facilities The CDM Regulations Say You Need On A Construction Site (By Law)

The CDM regulations have specific requirements about welfare facilities on construction sites. You must provide them - it's the law. Welfare facilities include sanitary conveniences (toilets, washing, etc.), drinking water, places for rest, and washing and changing facilities. Let's find out more about what's required.

Read Post
Can The Principal Contractor Be The Principal Designer? image

Can The Principal Contractor Be The Principal Designer?

We often get asked if the principal contractor can be the principal designer under the CDM 2015 regulations. The principal designer should be the designer in overall control of the pre-construction phase. This is usually the architect, but in some situations, can be the principal contractor.

Read Post

Spend less time on paperwork.
Start with the free plan today.

友情链: IM电竞app官方入口(im体育电竞app下载) im电竞最新版app | im电竞在线登录(IM电竞苹果下载) 2022im电竞官方下载 | im电竞竞猜app下载(IM电竞官网入口app最新版) 最新im电竞官网登录入口 | im电竞APP网址(IM电竞APP下载ios) 最新im电竞最新网站 | IM电竞官网下载(im电竞app官网) 最新im电竞网页登录ios下载 | im电竞app注册(im电竞下载官网) 2022im电竞安卓版 | im电竞app官方网站(可以观看im电竞的软件) 2022im电竞全站app下载 |