29th March, 2019
Silica dust kills around 800 people every year in the UK. Because silica dust is found in a lot of building materials, it's difficult to avoid. But avoid it, you must. Because the law, and your health, requires you to. How much silica dust is harmful, and what are the silica dust exposure limits?
Silica dust kills around 800 people every year in the UK. In fact, it came in 4th place of our top 5 health hazards at work . Because silica dust is found in a lot of building materials, it's difficult to avoid. But avoid it, you must. Because the law, and your health, requires you to.
If you carry out work that requires you to cut, sand, drill or carved materials containing silica, you create and release dust. This fine dust is known as respirable crystalline silica (RCS). This fine dust is what can be inhaled deeply into your lungs, causing long-term irreversible damage to your health.
Find out more about silica dust in our blog post what is silica dust and why is it bad for you?
The most at risk type of work include:
Especially if you work with sandstone, concrete, mortar, tile, granite, slate, brick, limestone and marble. Even certain types of plastic can contain silica.
The HSE publishes workplace exposure limits (WELs) for certain hazardous substances. WELs are the maximum amount of a hazardous substance that can be present in the air. A limit that should not be exceeded. They are a legal requirement
The measurement for a WEL is averaged over a period of time, known as a time-weighted average (TWA). Two time periods are commonly used:
You can find out more about WELs and how to calculate them in COSHH workplace exposure limits (WELs) explained .
Silica dust has a workplace exposure limit (WEL) of 0.1 mg/m3, expressed as an 8-hour time-weighted average (TWA). Exposure should be reduced as low a reasonably practicable, and at least below the WEL.
Because the WEL for RCS is an 8-hour WEL, you can exceed it but only for a short amount of time. As a simple example, if you had a concentration of 0.2 mg/m3 for 4 hours. This means you have reached the limit, and should not have any further exposure.
(0.2 x 4) / 8 = 0.1 mg.m-3
It's important to note that this isn't a safe level. Any amount of silica dust exposure can be harmful. As silica dust is a substance known to cause cancer, you must reduce exposure to as far below the level as is reasonably practicable.
But how do you know what levels you are being exposed to in the first place? And how do you check if limits are being reached? The answer can be found in the law.
Silica dust has many similarities to asbestos. It's naturally occurring. Its found in hundreds of building products. It is bad for your lungs. It kills hundreds of people every year. Unlike asbestos, it doesn't have its own set of regulations (currently). But that doesn't mean no regulations apply.
The control of substances hazardous to health (COSHH) regulations, apply to any substances that can harm health. That doesn't just mean chemicals or substances in packaging that you buy in. That includes hazardous dust that is produced as part of your work processes.
Concrete. Granite. Brick. Sandstone. Many natural materials contain silica. People are exposed to silica dust when they drill, saw or cut a material that contains silica. You must apply the requirements of COSHH to any work you carry out that produces silica dust.
In fact, the COSHH regulations make WELs a legal requirement. The regulations allow WELs to be set and require that any WEL is not exceeded.
Under COSHH, control is defined as adequate only if a) the principles of good control practice are applied, b) any WEL is not exceeded, and c) exposure to asthmagens, carcinogens and mutagens are reduced to as low as is reasonably practicable.
So what does the law say about silica dust? Well, as we mentioned earlier in the post, workplace exposure limits (WEL's) are legal limits. The COSHH regulations are also a legal requirement.
To comply with the law, you must carry out a COSHH assessment . This assessment should look at the level of risk and controls needed to reduce the risk. Controls might include PPE, but you should also consider controlling dust at the source, like wet cutting.
Find out more about controlling dust in how dust hazards in the workplace can kill your future .
The control measures you develop to reduce exposure to silica dust must keep exposure below the workplace exposure limit (WEL). That's 0.1 mg/m3 respirable crystalline silica (RCS) dust, averaged over 8 hours.
When assessing your work, you need to determine the levels of exposure you are likely to be exposed to. The closer you are to a limit, the more likely you are going to need to measure and monitor exposure.
10.—(1) Where the risk assessment indicates that—
- it is requisite for ensuring the maintenance of adequate control of the exposure of employees to substances hazardous to health; or
- it is otherwise requisite for protecting the health of employees,
the employer shall ensure that the exposure of employees to substances hazardous to health is monitored in accordance with a suitable procedure.
Download the silica dust toolbox talk and make sure your team know about the dangers. Use our free COSHH assessment template , or get the pre-completed silica dust COSHH assessment template for your work.
This article was written by Emma at 新IM电竞下比赛的网址 . Emma has over 10 years experience in health and safety and BSc (Hons) Construction Management. She is NEBOSH qualified and Tech IOSH.
Search hundreds of health and safety documents ready to edit and download for your business.Find Documents
If you work with wood, you're going to create dust. But if wood dust enters your lungs, it can cause health problems like asthma, and in some cases, cancer. If you work with wood, you need to be aware of the health hazards created by wood dust, so that you can protect yourself and work safely.Read Post
Summer might be the best season to work outdoors, but with temperatures rising, what about the dangers? Should you be worried about sun exposure? And how can you stay safe working in extreme heat? Can it ever be too hot to work?Read Post
Legionnaires' disease is an infection caused by breathing in small droplets of water contaminated by the Legionella bacteria. It is a severe form of pneumonia that can be fatal. Learn more about Legionnaires' disease and the 12 symptoms to look out for.Read Post
友情链： IM电竞app官方入口(im体育电竞app下载) im电竞最新版app | im电竞在线登录(IM电竞苹果下载) 2022im电竞官方下载 | im电竞竞猜app下载(IM电竞官网入口app最新版) 最新im电竞官网登录入口 | im电竞APP网址(IM电竞APP下载ios) 最新im电竞最新网站 | IM电竞官网下载(im电竞app官网) 最新im电竞网页登录ios下载 | im电竞app注册(im电竞下载官网) 2022im电竞安卓版 | im电竞app官方网站(可以观看im电竞的软件) 2022im电竞全站app下载 |