21st April, 2021


It's no secret that the Construction (Design and Management) Regulations apply to construction projects in the UK. The clue is in the name! But do these regulations impact manufacturing workplaces, and if so, how? Let's take a look.

Do The CDM Regulations Apply To Manufacturing? header image

The CDM Regulations are pretty much common knowledge in the construction industry. Particularly for contractors and designers. Because if you work on construction projects regularly, then CDM becomes part of your day-to-day work. But for some clients and businesses working on a one-off project, CDM may not be something they are familiar with or have even heard of before.

Find out more about CDM and its requirements in our blog post - what is CDM in construction?

A common belief is that the CDM Regulations only apply to the construction industry, but other workplaces can also be affected by the regulations. It's important to understand that the CDM Regulations apply to all construction work , regardless of the industry. And the definition of construction work under CDM can be far-reaching.

There are often occasions when construction work needs to happen within the manufacturing industry. Sometimes, it will be obvious when construction work is getting planned. For example, if you are having part of the facility refurbished or demolished. You will usually get builders in to carry out this work. And when builders are involved, it's a clear sign that construction work is happening.

So, yes, if you have a new building constructed or a refurbishment, the CDM regulations will apply to that project. Often, the architects and builders involved in the project will brief you on the requirements and your client duties . After all, they will have experience working under CDM from previous projects.

Find out more about CDM duties in our free CDM 2015 duty holder guides .

But there are other ways in which the CDM regulations may apply within a manufacturing environment. Situations that might not involve builders or architects. Work you might not consider to be construction work at all.

factory equipment

It's not always obvious when a task comes under the definition of construction work for CDM . It might be work you have carried out in-house. It could be an activity that only takes days or even hours. Maybe it only involves one or two people. It doesn't matter. CDM applies to all construction work, no matter the size or duration.

  1. the assembly on site of prefabricated elements to form a structure or the disassembly on site of the prefabricated elements which, immediately before such disassembly, formed a structure;

But what's all this got to do with manufacturing? Because many things can happen in a manufacturing environment that would come under the definition of construction work in CDM .

Here are several examples of manufacturing activities that can come within the scope of the CDM regulations:

As you can see, there are quite a few tasks and activities that can take place within a manufacturing environment where CDM can apply. I'm sure you can recall some of these happening within your workplace in the past.

Before 2015 the majority of CDM duties were triggered by notification thresholds. These thresholds being 30 days with 20 or more workers or 500 person-days. So smaller projects didn't have the bulk of requirements. But that's not the case any more. Your duties are the same whether or not the work is CDM notifiable .

cdm client

As well as having client CDM duties, under CDM 2015 requirements, you must appoint additional duty holders. These are people with CDM duties. Every contractor and designer involved in the task will have CDM duties. And if you have more than one contractor working on a project, you need to select a principal designer and a principal contractor. This situation happens quite often, for example, if your team and one external contractor are involved in the work activity.

Check if your project complies with CDM, with the free CDM compliance checklist .

Most projects involve more than one contractor at some stage. It can be the case even if you only appoint one contractor. It's important to note that if they subcontract any of the work, for example, an electrician or a scaffolder, then the requirement to appoint additional duty holders has been reached. If your project only involves a single contractor, then that one contractor will have extra CDM duties .

If you are carrying out all of the work in-house, including planning and doing the task, then it's likely that you will need to take on all of the CDM duties. You will be the client, designer, contractor, principal designer and principal contractor. As the client in a workplace like manufacturing, if you don't appoint the principal contractor and principal designer roles, you automatically become them.

The CDM regulations don't just apply when the construction work is happening, but also when you plan and prepare for the work to start. CDM applies to design, planning and gathering information. To comply, you should make sure the work can go ahead safely and with minimal risk. Several duties need to get discharged before work begins, so planning ahead is essential to ensure your manufacturing activities comply.

If you need to know more about CDM, and your duties, check out our free CDM duty holder guides .

share on twitter share on facebook share on linked in share by email

This article was written by Emma at 新IM电竞下比赛的网址 . Emma has over 10 years experience in health and safety and BSc (Hons) Construction Management. She is NEBOSH qualified and Tech IOSH.

Need CDM Help?

Get CDM support on your construction projects with our free guides and support packs for all duty holders.

CDM Support

Recent posts like this...

CDM Regulations Summary (And The 10 Golden Rules) image

CDM Regulations Summary (And The 10 Golden Rules)

CDM applies to all types of construction projects. No matter how big or small, how short or long. CDM applies. If you work in construction, this summary of the CDM regulations will give you a good basic introduction to what you need to do, and includes 10 golden rules to follow.

Read Post
What Welfare Facilities The CDM Regulations Say You Need On A Construction Site (By Law) image

What Welfare Facilities The CDM Regulations Say You Need On A Construction Site (By Law)

The CDM regulations have specific requirements about welfare facilities on construction sites. You must provide them - it's the law. Welfare facilities include sanitary conveniences (toilets, washing, etc.), drinking water, places for rest, and washing and changing facilities. Let's find out more about what's required.

Read Post
Can The Principal Contractor Be The Principal Designer? image

Can The Principal Contractor Be The Principal Designer?

We often get asked if the principal contractor can be the principal designer under the CDM 2015 regulations. The principal designer should be the designer in overall control of the pre-construction phase. This is usually the architect, but in some situations, can be the principal contractor.

Read Post

Spend less time on paperwork.
Start with the free plan today.

友情链: IM电竞app官方入口(im体育电竞app下载) im电竞最新版app | im电竞在线登录(IM电竞苹果下载) 2022im电竞官方下载 | im电竞竞猜app下载(IM电竞官网入口app最新版) 最新im电竞官网登录入口 | im电竞APP网址(IM电竞APP下载ios) 最新im电竞最新网站 | IM电竞官网下载(im电竞app官网) 最新im电竞网页登录ios下载 | im电竞app注册(im电竞下载官网) 2022im电竞安卓版 | im电竞app官方网站(可以观看im电竞的软件) 2022im电竞全站app下载 |